Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 10:38

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

the problem then depends on "how fast does the fuse operate?".

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

It also is a device that limits the change in current flow.

NBA Finals’ 17 best players ranked for Thunder vs. Pacers series - SBNation.com

This is where this question deviates from being a 'generic' question, and becomes more specific.

It seems Mohan does not understand the difference between a comment and an Answer.

The bolt then partially travels down the line to your home.

Can supporters of gun control explain the purpose behind a gun registry?

This is 'the assistant's answer'

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Space photo of the week: Pink 'raindrops' on the sun captured in greatest detail ever - Live Science

This device then solves the entire problem.

A circuit breaker is similar, but is resettable.

One

Do you remember one day, you put a deep smile on someone's face and made them very happy?

Here is a simplified AC power diagram.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Brave x Junction demo now available - Gematsu

The third is lightning and “how it gets conducted into a home.”

These are simplified answers to the original question, and does not change anything I wrote above.

2024–10–10[John johnson John Johnson ]

Confirmed: Breakfast Cereals Are Getting Sweeter And Less Nutritious - ScienceAlert

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

How do military families balance personal political views with respect for civilian leadership?

The other is “what does a “fuse” do?”

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

At one ohm, the resistor has a maximum of 1 watt power.

Monster black hole M87 is spinning at 80% of the cosmic speed limit — and pulling in matter even faster - Live Science

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

eight

What does a fuse do?

'Rock Showman' uncovers sandstone stegosaur near Whitby - BBC

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

A fuse is a non-resetable over current circuit protector.

(Dc diagram shown, AC is similar).

I think that being gay is wrong, but I treat gay people respectfully like any other person. Is it homophobic? Or offensive in any kind of way? Aren’t disagreement and discrimination two different things?

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

An AC voltage/ current source, and an ac inductive load.

2024–10–16 [ OO OLAOYE OYEBODE ]

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

2024–10–14 [Omar Gharbi Omar Gharbi ]

I post the exact comment here.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

a photo is worth a thousand words.

Because the load is inductive, the current lags the voltage.(by a bit).

[old diagram got deleted by accident]

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

First Sentence:

what exactly is a ‘surge’ protector?

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

What is lightning?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

but this device (an Inductor) … impedes the rapid changes in the current.

For this case there are devices called Metal oxide varistors (MOV).

Barnstars:

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

At least they know the answer if they wanted it.

so, what happens?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

but I think this circuit , shows a few more pieces.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

There are two important concepts here.

This one hit behind the barn.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

In schematic diagrams this is the symbol for a fuse:

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Now when you have a certain ac resistance, then a current flows in a loop.

There are three different concepts here that are getting confused.

Upvotes:

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

But… the neutral is now “floating” because of the 1 ohm resistance.

nine

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Edit 2024–10.

[image of Common-mode choke]

So, the voltage could go up to 500 volts, and the fuse will not open up.

He then asserts :

He then describes Rainy Season and Lightning.

But it can get overloaded, and no longer works.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

These devices are installed between the “hot” and “neutral” and protective ground.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

He then describes the function of a fuse.

One is “what exactly is in a ‘surge protector’ ? ”

This is where the MOV conducts again, and dissipated the energy.